Workday
Arcade Optimized
Arcade.dev tools for interacting with Workday
Author:Arcade
Version:
4.0.1Auth:User authorization
6tools
6require secrets
Arcade toolkit for interacting with Workday on behalf of a signed-in worker. Enables reading worker identity, time-off balances, eligible time-off types, and existing requests, as well as validating dates and creating or submitting time-off requests.
Capabilities
- Worker identity: Resolve the signed-in worker and their job(s) before taking any action; all tools operate on this same worker and cannot target another.
- Time-off balances & eligibility: Retrieve balance snapshots exactly as Workday calculates them, and list eligible time-off types with their rules (units, required reasons, position requirements, clock-time settings, draft support).
- Date validation: Check candidate dates against a selected time-off type before creating a request; results report acceptance per date and any known bookings, but not available quantity.
- Request creation: Draft or submit time-off requests with type-resolved rules; handles unknown confirmation states, warnings that block writes, and incomplete read-backs without repeating the create.
- Request listing & status: Page through existing requests with optional date bounds, grouped by type/unit/status/position; surfaces draft and sent-back requests that require action in the Workday UI.
- UI handoff awareness: Existing requests cannot be modified or cancelled via this toolkit; the tools explicitly signal when Workday UI action is required.
OAuth
Uses OAuth 2.0 via the Workday provider. The signed-in user's identity determines which worker record all tools read and write.
Secrets
-
WORKDAY_BASE_URL— The base URL of your organization's Workday REST API endpoint (e.g.,https://wd2-impl-services1.workday.com). This value is specific to your Workday environment and data center. Find it in your Workday tenant's API configuration or by consulting your Workday system administrator. It is also visible in the URL of your Workday tenant's web interface. -
WORKDAY_TENANT_NAME— The unique tenant identifier for your Workday instance (e.g.,mycompany_implormycompany). This is the subdomain or path segment that identifies your organization's Workday environment. Your Workday administrator can provide this; it also appears in the URL when you log in to Workday (e.g.,https://impl.workday.com/<tenant_name>/...).
Store secrets in the Arcade dashboard or via the secrets API. See the Arcade secrets configuration guide and manage your secrets at https://api.arcade.dev/dashboard/auth/secrets.
Available tools(6)
6 of 6 tools
Operations
Behavior
| Tool name | Description | Secrets | |
|---|---|---|---|
Request time off for the signed-in worker, asking for a draft by default.
Set mode to submit only when the worker asks for submission. Existing drafts must
be submitted in the Workday UI; existing requests must also be changed or cancelled
there. The receipt reports the confirmed state, or created_status_unknown when
read-back cannot confirm it. In that case, look up the request's status using the
returned identifiers; do not repeat the create. Recorded amounts appear in days;
requested_days preserves the values sent, and missing amounts are unconfirmed. The type's
rules are resolved from Workday first, so a reason, a position, and an omitted
quantity are checked against that type before anything is written. Workday owns the
rest of the validation; its rejections come back as errors describing what to change.
In the receipt, days[].date matches the requested date and days[].unit labels only
that entry's recorded amount. Missing quantity means unconfirmed, never zero.
requested_days contains the quantities (including defaults) and clock times sent.
status is draft_saved, submitted, approved, or sent_back when confirmed;
created_status_unknown means the request exists but its state is unknown, and
blocked_by_warning means nothing was written. requires_workday_ui_action=false
on an unconfirmed receipt means no action was established; read status before advising. | 2 | ||
List the time-off types the signed-in worker can request, with their rules.
Each entry includes its display name and time_off_type_id. Retrieve the options here
and pass the chosen ID to the date check and request tools. Each entry also carries what
Workday reports for that type: a default quantity, whether a reason is mandatory
and which reasons are allowed, whether a position must be named, and whether clock
times are required, determine the quantity, or may cross midnight. `draft_support`
reports evidence of existing drafts. Requests use draft mode by default; set mode
to submit only when the worker asks for submission.
Each type's unit is the unit to use for request quantities; do not pass fractions
of a full day for an hourly type. start_and_end_time_required requires both clock
times. calculate_quantity_based_on_start_and_end_time means Workday determines the
recorded quantity from those times. crossing_over_midnight_enabled permits an
earlier end time on the following date, keeping the span under 24 hours. | 2 | ||
Show how much time off the signed-in worker has left, by plan.
Balances come back exactly as Workday calculates them for the as-of date; this
tool never projects or totals an accrual Workday did not return. It reads the
signed-in worker record to address the balances to that worker. Read `coverage`
before relaying an empty list: it says whether no plan is tracked for this worker
or the read simply did not finish, and a worker whose time off is not
balance-tracked can still request time off. | 2 | ||
List the signed-in worker's time-off requests and where each one stands.
Defaults to no date bound, subject to the read cap. Provide dates to narrow the
upstream search when results are incomplete. Requests come back in ascending order
of their earliest matching date. The first page contains the earliest matching
requests, which may be years in the past when no lower date bound is supplied.
For upcoming or next time off, set from_date to today's date in YYYY-MM-DD;
the unbounded first page does not identify the next time off. For time off already
taken, set to_date to today's date, and for a period such as this year, pass both
bounds.
A request with different types, units, statuses, positions, reasons, or notes
appears as separate groups sharing one request_id. All matching groups stay on
one page and count as one request. Dates and quantities describe only matching
entries within the requested window. Capped reads mark groups incomplete and omit
quantity totals. Each group reports its own status and action guidance. Existing
requests must be changed or cancelled in Workday; this toolkit cannot modify them.
requests[].dates are YYYY-MM-DD dates inside the selected window; out-of-window
days of the same request are excluded. Each group's unit applies only to that group.
result_count, total_count, limit, and offset count distinct request IDs, not groups.
Page with has_next_page and next_offset. results_truncated means the upstream read
was capped; no offset completes that read, so narrow the date bounds or check Workday.
requires_workday_ui_action identifies drafts or sent-back groups needing action;
use their workday_ui_action, falling back to the response's shared guidance.
status=unknown means Workday's status was missing or unrecognized. Check Workday
to confirm its state and any required action; requires_workday_ui_action=false
does not establish that no action is needed for an unknown status. | 2 | ||
Check whether Workday accepts each date for the selected time-off type.
Send the candidate dates together before creating a request. Each result separates
date acceptance from the configured default and existing bookings. A default does
not establish a maximum, and a missing default says nothing about the worker's
schedule. Accepted dates therefore have unknown capacity; Workday validates the
requested quantity on submission.
Booking totals include only matching known units and position scope. Incompatible
units or ambiguous positions leave the total unknown. Worker-based checks include
bookings regardless of their position reference; position-scoped checks exclude
bookings against another position. Incomplete booking lookups omit all booked totals
and disclose that the booking names shown are partial results.
dates[].valid reports date acceptance, not available quantity. valid_count counts
accepted dates. bookable_spans stays empty because maximum capacity is unknown;
this does not mean none of the dates are valid. Read coverage_note for lookup limits. | 2 | ||
Identify the Workday worker the connection is signed in as, and their jobs.
Call this before acting on the worker's record so the answer is anchored to the
right person and tenant. Every other tool in this toolkit acts on this same worker
and cannot be pointed at anyone else. | 2 |
Last updated on